宾夕法尼亚州伊利，2020年6月3日 —— 全球运动和控制技术领导者派克汉尼汾公司（Parker Hannifin Corp.）的Autoclave Engineers（AE）宣布，其经过特殊改造的针阀和止回阀已符合ISO 19880-3规范的要求，可用于加氢站。此外，这些阀门已获得韩国天然气安全公司（KGS）的批准，可用于即将在韩国进行的项目。

每种类型的阀门都有两种不同的连接方式，适用于高达15000或20000 psi（100 MPa或138 MPa）的压力，并具有有效密封小分子气体的特殊功能。

人们对更可持续、更节能的汽车的需求在稳步上升，这些汽车能够向大气中释放零污染，即水蒸气而不是二氧化碳。因此，对更多高压（70兆帕）氢气加注站的需求正在增加，这些新一代汽车目前正由世界各地的几家制造商开发。

这些针阀的氢气变化采用独特的阀杆/阀座和填料设计，可承受-73°C至316°C之间的温度和高达20000 psi（138 MPa）的压力，同时将循环寿命提高40%。针阀和止回阀可与任何Parker仪表连接选项一起使用，包括锥形和螺纹接头以及MPI中压接头。

适用于所有氢动力车辆-轿车、公共汽车、卡车-35和70兆帕氢燃料站由一个分配器组成，可使车辆充满氢气，氢气已被压缩至100兆帕，快速输送，并安全储存在远离单个泵的地方。

Parker Autoclave Engineers的其他产品适用于此应用，包括配件、管道、止回阀和过滤器。这些采用中压锥形螺纹连接或MPI中压配件，以实现可靠的密封性能。

Parker Autoclave Engineers简介

Parker Autoclave Engineers是派克汉尼汾仪表集团的一部分，是设计和生产高压阀门、配件和管道的全球专家。压力高达150,000 psi （超过1000兆帕），我们的产品是石化、化工、油气行业的首选产品。

关于Parker Hannifin

派克·汉尼芬是《财富》250强全球运动和控制技术的领导者。一个多世纪以来，该公司一直致力于实现工程突破，从而带来更美好的明天。

氢气加注系统图片分享

Parker Instrumentation Products Division first company of its kind to receive KGS ISO-19880-3 Hydrogen fueling station approval

Erie, Pennsylvania, 3rd June 2020 – Parker Instrumentation Products Division - Autoclave Engineers (AE) of Parker Hannifin Corp., the global leader in motion and control technologies, announces that its specially modified needle and check valves have qualified for use in Hydrogen fuelling stations per ISO 19880-3 specifications. In addition, these valves are approved by the Korea Gas Safety Corporation (KGS) for use in upcoming projects in South Korea.

Each type valve is available with two different styles of connections suitable for pressures up to 15,000 or 20,000 psi (100 MPa or 138 MPa) and incorporates special features that seal this small molecular gas efficiently.

The need for more sustainable, energy efficient vehicles that release zero pollution, i.e. water vapor instead of CO2 into the atmosphere, is steadily on the rise. As a result, demand for more high-pressure (70 MPa) Hydrogen filling stations to fuel these next-generation vehicles, which are currently being developed by several manufacturers around the world, is increasing.

The Hydrogen variation to these needle valves incorporates a unique STEM/SEAT and PACKING design that can withstand temperatures ranging between -73°C and 316°C and pressures of up to 20,000 psi (138 MPa) while increasing cycle life by as much as 40%. Both the needle and check valves are available with any Parker Instrumentation connection options including cone & thread fittings and MPITMmedium pressure fittings.

Suitable for all Hydrogen-powered vehicles – cars, buses, trucks – 35 and 70 MPa Hydrogen fuel stations consist of a dispenser that enables vehicles to be filled up with H2 fuel, which has been compressed up to 100 MPa, delivered quickly, and stored safely away from the individual pumps.

Other Parker Autoclave Engineers’ products that are suitable for this application include fittings, tubing, check valves, and filters. These utilise a medium-pressure coned & threaded connection or MPI medium pressure fittings for leak-tight reliable performance.

About Parker Autoclave Engineers

Parker Autoclave Engineers, part of Instrumentation Group of Parker Hannifin are worldwide experts in the design and production of high-pressure valves, fittings, and tubing. With pressures up to 150,000 psi (over 1000 MPa), our products are the first choice for the petrochemical, chemical, water blast, water jet, and oil and gas industries.

About Parker Hannifin

Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For more than a century, the company has been enabling engineering breakthroughs that lead to a better tomorrow.