Barksdale Control Products 公司介绍

 
 
 
 
 
 
 
 
 
 
应用领域
邮件联系我们
 

Since 2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


   

Barksdale Series S20517 pressure regulators
Series S20517 1- ” Stainless Steel Pressure Regulator
S20517系列1-1/2“不锈钢压力调节器
Heavy Duty Shear-Seal Regulator for Offshore
海上重型剪切密封调节器

 

Series S20517 Description

Barksdale的压力调节器是敏感的压力控制装置,用于在液压回路中保持预先确定的压力。不锈钢调节器提供耐腐蚀、316不锈钢、带SAE J518-2规范62法兰的装置,这些是本系列的标准。代码62法兰是经过工业验证的无泄漏连接,适用于更高的压力,便于安装。Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The Stainless Steel Regulators offer corrosive-resistant, 316 stainless steel, units with SAE J518-2 code 62 flanges, which are standard with this series. Code 62 flanges are industry proven leak-free connections suited for higher pressure that offer ease of installation.

 

设计用于提供多年无故障运行和几乎零泄漏,剪切密封?设计使用流体压力来保持无泄漏的金属对金属密封,随着使用而改进。转子和压力密封之间的剪切作用不断地重叠配合面,防止污染物在密封面之间倒伏。其结果是阀门不会磨损,但随着时间的推移会逐渐磨损,从而在产品的整个生命周期内为您提供始终如一的卓越控制。Designed to provide years of trouble-free operation and virtually zero leakage, the Shear-Seal? design uses fluid pressure to maintain a leak-free metal-to-metal seal that improves with use. The shearing action between the rotor & pressure seal continually laps the mating surfaces and prevents contaminates from lodging between the sealing surfaces. The result is a valve that doesn’t wear out – but wears in over time, providing you superior control consistently through the entire life of the product.

Barksdale Series S20517 Stainless Steel pressure regulators
1-1/2”S20517系列不锈钢压力调节器阀

 

Features

Original Shear-Seal? technology
Stainless steel construction
SAE J518-2 code 62 pressure connections
High flow capacity
Wide regulated pressure range
Tolerates contaminated media
Fail-safe motor control options
Self venting
Surge dampening

 

- 1-1/2”S20517系列不锈钢压力调节器阀 Applications应用

Offshore and land-based oil drilling controls
海上和陆上石油钻井控制
BOP control units
防喷器控制装置
Pressure sensitive equipment
压敏设备

 

Technical specifications - General Specifications*

特征

  • 独特的Shear-Seal?技术
  • 不锈钢结构
  • SAE J518-2代码62压力连接
  • 高流量
  • 调节压力范围广
  • 耐污染的介质
  • 故障安全电机控制选项
  • 自排气
  • 浪涌衰减

技术指标

一般规格*

压力:
供给/入口压力:


3,000 psi的调节压力范围供给压力:
高灵敏度:
满量程:

5,000 psi的调节压力范围供给压力:
高灵敏度:
整个范围:

环境温度范围:

入口耐压:

外壳耐压:

3000磅(207巴)
5000 psi的(345巴)


300 - 1600磅(21 - 110巴)
300 - 2800磅(21 - 193巴)


500 - 1600磅(34 - 110巴)
500 - 3000磅(34 - 207 bar)

-30°至+ 185°F(-34°至+ 85°C)

7,500 psi(517 bar)

4,500 psi(310 bar)
流量:
流量:
Cv出口:
Cv排气口:

120 GPM(@ 50英尺/秒)
17.5
1.6
移植:
供应1:
供应2:
出口(受管制):
通风口:

1英寸SAE J518代码62法兰; NPT或SAE移植选件
1” SAE J518代码62法兰; NPT或SAE端口选件
1-1 / 2“ SAE J518代码62法兰; NPT或SAE移植选件
1” SAE J518代码62法兰; NPT或SAE移植选项
结构材料:
外部部件
阀体,法兰和弹簧壳体:
调节手柄,齿轮箱:(
用于机动车型)
硬件:
湿部件
滑块,进气口,通风孔和 挡板 ,压力密封件:
其他内部湿部件:
O型圈材料:
备用环材料:


316系列不锈钢
镀镍17-4 ST STL

316系列不锈钢

400不锈钢
300系列不锈钢
Buna N
PTFE
气动先导电动机(前缀“ F”):
先导电动机工作压力:
A和B口:
工作温度范围:
喷漆钢
80-120 psi(5.5-8.3 bar)
1/4“ NPT
-30°至+ 185°F(-34°至+ 85°C)
液压先导马达(前缀“ G”):
先导马达工作压力:
A和B口:
工作温度等级:
适用于3/8英寸管(尺寸-6)的 400-1600
psi(6.9-110 bar)
SAE 喷漆钢
-30°至+ 185°F(-34°至+ 85°C)
近似运输重量**:
手动装置:
气动马达装置:
液压马达装置:

85磅 (38.6公斤)
105磅 (47.6公斤)
105磅 (47.6公斤)
*有关其他选项,请参阅产品配置器。
**重量基于代码62法兰

 

Pressure:
Supply/Inlet Pressures:


Regulated Pressure Range at 3,000 psi Supply Pressure:
High Sensitivity:
Full Range:

Regulated Pressure Range at 5,000 psi Supply Pressure:
High Sensitivity:
Full Range:

Ambient Temperature Range:

Inlet Proof Pressure:

Case Proof Pressure:

3,000 psi (207 bar)
5,000 psi (345 bar)


300 - 1600 psi (21 - 110 bar)
300 - 2800 psi (21 - 193 bar)


500 - 1600 psi (34 - 110 bar)
500 - 3000 psi (34 - 207 bar)

-30° to +185°F (-34° to +85°C)

7,500 psi (517 bar)

4,500 psi (310 bar)
Flow:
Flow Rate:
Cv Outlet:
Cv Vent:

120 GPM (@ 50 ft/s)
17.5
1.6
Porting:
Supply 1:
Supply 2:
Outlet (Regulated):
Vent:

1” SAE J518 code 62 flange; NPT or SAE porting option
1” SAE J518 code 62 flange; NPT or SAE porting option
1-1/2” SAE J518 code 62 flange; NPT or SAE porting option
1” SAE J518 code 62 flange; NPT or SAE porting option
Materials of Construction:
External Components
Body, Flanges, & Spring Housing:
Adjusting Handle, Gear Housing:
(for motorized models)
Hardware:
Wetted Componetns
Slide, Inlet, Vent & Blocking Plates, Pressure Seals:
Other Internal Wetted Components:
O'ring Material:
Backup Ring Material:


316 Series stainless steel
Nickel Plated 17-4 ST STL

316 Series stainless steel

400 Stainless steel
300 Series stainless steel
Buna N
PTFE
Pneumatic Pilot Motor (“F” prefix):
Pilot Motor Working Pressure:
Porting A & B:
Operating Temperature Range:
Painted steel
80 - 120 psi (5.5 - 8.3 bar)
1/4” NPT
-30° to +185°F (-34° to +85°C)
Hydraulic Pilot Motor (“G” prefix):
Pilot Motor Working Pressure:
Porting A & B:
Operating Temperature Rating:
Painted steel
400 - 1600 psi (6.9 - 110 bar)
SAE for 3/8” tube (Size -6)
-30° to +185°F (-34° to +85°C)
Approximate Shipping Weight**:
Manual Unit:
Pneumatic Motor Unit:
Hydraulic Motor Unit:

85 lbs. (38.6 kg)
105 lbs. (47.6 kg)
105 lbs. (47.6 kg)
* See product configurator for additional options.
** Weight is based on the code 62 flanges


   


美国DMK Engineering Solutions公司
信德迈科技(北京)有限公司 CNMEC Technology


地址:北京市朝阳区望京街10号望京SOHO塔1C座2115室
邮编:100102
电话:010-8428 2935, 8428 9077, 8428 3983
手机:139 101 22694
Http://www.cnmec.biz
E-mail:sales@cnmec.biz
传真:010-8428 8762


京ICP备08000876号-1
京公网安备 11010502019740
Since 2007 Strong Distribution & Powerful Partnerships