Triple-Lok 37°扩口JIC 标准硬管接头和过渡接头
Parker Fittings接头 Parker Adapters
Triple-Lok 37° Flare JIC Tube Fittings and Adapters

派克的37° Flare JIC管接头和适配器Triple-Lok 满足SAE J514和ISO 8434-2的要求，并提供业界最广泛的端口端产品。该设计具有较小的金属对金属密封面积，从而实现了紧凑的设计，低组装扭矩，高温和高压能力。派克的Triple-Lok 37°扩口式JIC硬管接头和过渡接头密封方式是金属对金属形式，为高压应用提供了可靠的零泄漏连接的解决方案。

Parker Triple-Lok 37°喇叭形JIC管接头和接头是可靠的无泄漏金属对金属连接解决方案，适用于大多数高压液压应用。Parker Triple-Lok 37° Flare JIC Tube Fittings and Adapters are a reliable leak-free metal to metal connection solution for most high pressure hydraulic applications. Parker's 37° Flare JIC tube fittings and adapters, Triple-Lok?, meet the requirements of both SAE J514 and ISO 8434-2 and offer the industry's broadest offering of port ends. The design has a small metal to metal seal area which results in a compact design, low assembly torque, high temperature and high pressure capability.

Parker Triple-Lok 37° Flare JIC Tube Fittings and Adapters Triple-Lok 37°扩口JIC 标准硬管接头和过渡接头
Triple-Lok 37° Flare JIC Tube Fittings and Adapters

市场：

- 建筑
- 军用地面系统
- 高空作业
- 农业
- 物料搬运
- 军用航海
- 发动机传动装置

特点/优点：

- 易于适应英制管，公制管和软管，从而获得了世界范围的认可。
- 大量的端口端选项，包括SAE直螺纹O型圈凸台（ORB），NPTF，BSPP-ED，BSPP-O型圈固定环（ORR），BSPP，BSPT，ISO 6149，公制O型圈固定环（ORR）和Metric-ED
- 派克可调节端口上的坚固端口螺柱采用更长的防松螺母制成，几乎消除了垫圈的损坏和潜在的泄漏，并且使装配几乎防错。此功能提高了客户的内部效率，并减少了由于备用垫圈损坏而导致的返工成本，这种损坏通常是市场上传统的SAE可调节端口端所见。
- 钢制配件大大超过了72个小时的SAE腐蚀要求，无红锈，经独立测试机构发现，这种耐久度可达1,000。增强的性能通过延长设备寿命为客户提供竞争优势，从而增加收入并降低保修成本。
- 不锈钢螺母带有涂层以防止磨损。
- 提供钢，不锈钢和黄铜，尺寸为1/8“-2?”，工作压力高达7500 psi。

应用：
- 液压和气体处理连接

Markets:
- Construction
- Military Ground Systems
- Aerial Lift
- Agriculture
- Material Handling
- Military Marine
- Engine Transmission

Features/Benefits:
- Easily adaptable to inch tube, metric tube and hose giving it worldwide acceptance.
- Vast selection of port end options, including SAE Straight Thread O-ring Boss (ORB), NPTF, BSPP-ED, BSPP-O-ring Retaining Ring (ORR), BSPP, BSPT, ISO 6149, Metric-O-ring Retaining Ring (ORR), and Metric-ED
- Parker's Robust Port Stud on adjustable ports is manufactured with a longer locknut virtually eliminating washer damage and potential leaks, as well as making assembly virtually mistake-proof. This feature improves customer internal efficiencies and reduces rework costs resulting from backup washer damage commonly seen with traditional SAE adjustable port ends in the market.
- Steel fittings substantially exceeded the SAE corrosion requirements of 72 hours without red rust, lasting up to 1,000 as found by an independent test facility. This enhanced performance provides customers with a competitive advantage through extended equipment life, leading to increased revenues and reduced warranty costs.
- Stainless Steel nuts have a coating to prevent galling.
- Available in steel, stainless steel, and brass in sizes 1/8” - 2 ?” with working pressures up to 7500 psi.

Applications:
- Hydraulic fluid and gas handling connections

Triple-Lok 37° Flare JIC Tube Fittings and Adapters Technical Specifications