Parker派克 O-LUBE通用润滑脂 Parker O-lube 884-2 is a barium base petroleum grease
General Purpose Barium O-lube Grease Lubricant, Hydrocarbon Service and Pneumatic Systems Under 200 psi, Translucent
Parker O-Lube grease lubricant
Parker O-lube 884-2 is a barium base petroleum grease

Parker派克的O-Lube是用于油气和气动系统中的O形圈和其他密封件的极好的通用润滑脂。派克O-Lube是一款通用润滑脂，可保护O型圈和密封件在碳氢化合物和气动系统安装过程中免受损坏。Parker's O-Lube is an outstanding general purpose grease lubricant. It is intended for use with seals that perform in hydrocarbon service. It can also be used in pneumatic service.Parker’s O-lube is a barium base petroleum grease that prolongs the life of synthetic rubber seals. It offers excellent surface adherence and lubrication with inherent water resistance. It is recommended for low-pressure pneumatic systems, as well as reciprocating and low-speed oscillating or rotary applications. Parker O-Lube works well in a –20°F to +180°F temperature range. It is not recommended for silicone, butyl, or ethylene propylene rubber seals, or for use in systems with micronic filters.

General Purpose Barium O-lube Grease Lubricant, Hydrocarbon Service and Pneumatic Systems
Parker O-lube 884-2 is a barium base petroleum grease
Parker O-Lube grease lubricant

市场：
- 建筑
- 军事地面系统
- 升降机
- 农业
- 物料搬运
- 机床
- 交通运输

特点与优势：
- 具有优异的表面粘附性和润滑性，具有固有的耐水性。
- 适用于-20°F至+ 180°F和-29°C至+ 82°C的温度范围。

应用：
- 连接接头以及过渡接头的润滑O形圈，用于液压以及气动流体及气体处理连接。

技术特点：
- 不推荐用于硅胶，丁基橡胶或乙丙橡胶密封圈，或用于带有微型过滤器的系统。

- Heat resistance – up to 82°C (180°F)
- Cold flexibility – Down to -29°C (-20°F)
- All-purpose
- Excellent surface adherence
- Water resistant

Compatible with:
- Epichlorohydrin
- Fluorocarbon
- Fluorosilicone
- HiFluor
- HNBR
- Neoprene
- Nitrile
- Perfluoroelastomer
- Polyacrylate
- Polysulfide
- Polyurethane

Not Recommended for:
- Use with silicone, buytl, or ethylene propylene rubber seals
- Systems with micronic filters

*There are special situations that may exist where one of the Parker lubricants would not be the best recommendation. For guidance in handling these unique situations, consult a Parker Applications Engineer via our online chat feature or email ordmailbox@parker.com

**Custom sizes and coatings/markings are available upon request. Contact Parker O-Ring Division at 859-269-2351 for design and pricing assistance.

性能特点

最低工作温度 (F) -20
最高工作温度 (F) 180
最低工作温度 (C) -29
最高工作温度 (C) 82

Parker O-lube 通用润滑脂


派克的O-Lube是用于油气和气动系统中的O形圈和其他密封件的极好的通用润滑脂。Parker O-lube Part No. 884-2 is a barium base petroleum grease formulated to facilitate installation and extend service life of synthetic rubber O-rings and seals. A thin film of Parker O-Lube applied to the seal itself as well as the surfaces over which the seal will travel is suggested for best results.

Parker O-Lube combines excellent surface adherence characteristics and lubricity with inherent water resistance. This lubricant is especially recommended for low pressure pneumatic systems as well as reciprocating and low speed rotary or oscillating applications.

Parker O-Lube is sold in 2oz tubes and is recommended for use with Viton ? Fluorocarbon FKM, Markez ? Kalrez ? FFKM, NBR Buna-N Nitrile, HNBR, Polyurethane, Aflas ?, Fluorosilicone, Polyacrylate, Vamac ?, Neoprene ? materials. Parker O-Lube is NOT recommended for use in systems having micronic filters or in contact with seal materials unsuited for petroleum oil service such as silicone, butyl or ethylene propylene. For these applications use Parker Super O-Lube should be considered.

Temperature range is -20°F to +300°F.

Parker Super O-lube 派克超级 O-LUBE 润滑油

派克的通用O形圈润滑油-超级 O-lube润滑油，可在液压应用中安装时保护O形圈免受损坏。Parker Super O-Lube SLube 884-2 is a silicone based lubricant intended to compliment Parker O-Lube. Super O-lube is sold in 2oz tubes and can be used with virtually any rubber polymer. Super O-Lube can also be used over a wider temperature range and in most cases will provide improved environmental protection to the elastomer. It is recommended that Super O-Lube be used sparingly as only a thin film is necessary for optimum results. This lubricant is useful with a wide variety of fluid media since it is quite inert. High pressure systems as well as vacuum uses are typical applications where Super O-Lube is beneficial.

Parker Super O-Lube is nontoxic and non-irritating under normal conditions. It will not clog 30 micron filters and is unusually moisture resistant and adheres with unusual tenacity.

Temperature range is -65°F to +400°F.

COMMUNITIES, BLOGS, AND INDUSTRY LINKS
TFD techConnect - Industry Information and Technical Tips
LITERATURE AND REFERENCE MATERIALS
Industrial Tube Fittings, Adapters and Equipment, Catalog 4300 - Assembly and Installation Instructions
- Parker Tube Fittings, Adapters and Equipment, Catalog 4300 - Equipment Section
SELECTOR GUIDES
Parker FittingFinder App
SERVICES
Rapid Custom Manufacturing

COMPLIANCE, CERTIFICATIONS, & SAFETY
O-lube Safety Data Sheet
REACH and SVHC Compliance
RoHS Compliance
Shelf Life
LITERATURE AND REFERENCE MATERIALS
Parker O-Ring Handbook - ORD 5700
FF580-75 and FF582-90 Ultra O-Rings - ORD 5764
Technical Glossary
Diagnosing damaged O-rings
FF200-75 for Thermal and Wet Semiconductor Applications
FF374-60 & FF376-80 - ORD 5763
HF355-65 for Life Sciences - ORD 5759
HF355-65 for Semicon - ORD 5758
How to lubricate an O-ring
Low Temperature FKM V1289-75 - ORD 5743
Low Temperature HNBR KA183-85 - ORD 5749
Mobile inPHorm app
O-Ring Coatings: Advanced Coating Methods for All of Your Application Needs - ORD 5757
O-Ring Coatings: Advanced Coating Methods for All of Your Application Needs ORD 5757
O-Ring Division Frequently Asked Questions
O-Ring Kits and Accessories - ORD 5742
O-Ring Seals for Automotive Fuel System "Quick Connects" - ORD 5732
O-Rings for ISO6149 Metric Tube Fittings - ORD 5733
Parker O-Ring eHandbook
Proper installation of an O-ring: Dovetails
Proper installation of an O-ring: Face Seals
Proper installation of an O-ring: Female Radial
Proper installation of an O-ring: Male Radial
Seals for CO2 Refrigeration - ORD 5729
V1238-95 Explosive Decompression and Extrusion Resistant Fluorocarbon Elastomer - ORD 5704
V1289-75 Low Temperature FKM (Aerospace) - ORD 5760
Wind Power O-Rings - ORD 5762
SELECTOR GUIDES
Parker O-Ring Handbook - ORD 5700
Mobile inPHorm app