|
Heat Trace Tubing伴热管
派克生产隔热和伴热管产品已有40多年的历史。我们的热控制管产品不限于伴热管。其他产品包括蒸汽和电伴热管，以及分析仪和探头支架套件。这些束通常用于化学加工和精炼厂，发电，过程控制和环境监测系统中的温度维护和防冻。Parker has produced thermal insulated and heat traced tubing products for over 40 years. Our thermal control tubing products are not limited to heat trace tubing. Other products include steam and electric trace tubing, as well as, analyzer and probe support bundles. These bundles are typically used for temperature maintenance and freeze protection in chemical processing and refineries, power generation, process control and environmental monitoring systems.
排序方式：
Temptube -预绝缘管
ParflexTemptube 是隔热的，并使用柔软的阻燃PVC护套进行保护，从而提供了一种经济的方法来将蒸汽和热物料通过工厂传输，而热量损失最小。
12个零件
SL-用于低温维护的自调节Temptrace?套件
SL-Temptrace?电走线管束可提供防冻保护，并为化学处理和精炼应用中的气体，液体和其他粘性材料提供低温维护。
24部分
自调节高温维护套件-SH-Temptrace?
自调节式Temptrace?绝缘管束可为气体，液体和其他工艺材料提供防冻保护和高温维护。
24部分
轻蒸汽示踪束-LT-Temptrace?
LT Temptrace?捆绑包设计有单根或多根工艺管，隔热层以最大程度地减少热量散失和阻燃护套来提供额外的保护；简单仪器管线防冻保护和粘度保持的理想选择。
10个零件
重型蒸汽示踪束-HT-Temptrace?
Parflex HT-重蒸汽示踪束设计用于压力传输应用和分析仪样品线，其中载有重油或馏出物，气体或蒸气。
10个零件
淘汰：CL-Constant Wattage Temptrace?用于低温维护
帕克不再提供该产品。联系我们，为您的应用找到替代解决方案。
36个零件
过时的：CH-用于高温维护的恒定功率Temptrace?
帕克不再提供该产品。联系我们，为您的应用找到替代解决方案。
36个零件
IS –间歇式蒸汽吹扫套件，用于防冻
Parflex IS-间歇性蒸汽吹扫套件设计用于防冻和定期高温蒸汽吹扫。
48个零件
Multitube CS –连续蒸汽吹扫套件
CS-连续蒸汽吹扫套件，用于连续高温蒸汽吹扫，最高可达1100°F（593°C）。束是隔热的，可在恶劣条件下的操作环境中进行防冻保护。
48个零件
已淘汰：用于高温维护的Multitube 矿物绝缘电走线管
帕克不再提供该产品。联系我们，为您的应用找到替代解决方案。
14个零件
已淘汰：用于环境监测系统的分析仪套件
帕克不再提供该产品。联系我们，为您的应用找到替代解决方案。
1部分
Multitube 金属和塑料管束
Multitube 金属和塑料管束可节省空间，降低安装成本，并为各种工业厂房，机器人和实验室应用提供保护。
92零件
用于SL和SH Temptrace?束的带接线盒的电源连接套件
电源连接套件经过FM认证，可与SL和SH-Temptrace?捆绑包一起使用。该套件可用于轻松安装组合电源连接和用于单管和双管束的防水密封。
3部分
SL和SH系列自调节Temptrace?套件的通用套件
用于SL和SH系列自调节Temptrace?束的电子接头或三通连接套件。
4部分
用于Temptrace?套件的电气端接套件
电气端接套件提供了一种简单方便的方法，用于端接Self-regulated Temptrace?束中的加热电缆的非供电端。
5部分
已淘汰：用于恒定功率Temptrace?套件的电气连接套件
帕克不再提供该产品。联系我们，为您的应用找到替代解决方案。
1部分
用于Parflex Temptrace?捆绑包的热缩靴（HSB）
Parflex热缩靴（HSB）旨在防止水分进入Parflex Temptrace?束的末端。
6部分
用于包装的Multitube 室温硫化（RTV）末端密封胶
室温硫化（RTV）末端密封剂适用于所有Multitube 束，尤其是绝缘束。它对天气，臭氧，石油，多种化学物质和极端温度具有极好的抵抗力。
3部分
派克Temptrace?馈通（PTFT）套件
Parker Temptrace?馈通（PTFT）套件用于Temptube?和Temptrace?束安装和密封。
6部分
适用于Temptrace?束的ParkerMultitube 接头套件
ParkerMultitube 接头套件旨在为Temptrace?束提供长寿命，防风雨的绝热材料。
3部分
现场可调恒温器和温度控制器
现场可调，防篡改的恒温器和温度控制器，可与Multitube 电伴热束一起使用。
4部分
Sort By:
Temptube - Preinsulated Tubing
Parflex Temptube is thermally insulated and protected with a flexible, flame-resistant PVC jacket to provide an economical method for conveying steam and hot materials through a plant with minimal heat loss.
12 Parts
SL - Self-Regulating Temptrace? Bundles for Low Temperature Maintenance
SL-Temptrace? electric trace tubing bundles deliver freeze protection and provide low temperature maintenance for gases, liquids and other viscous materials in chemical processing and refinery applications.
24 Parts
Self-Regulating High Temperature Maintenance Bundles - SH-Temptrace?
Self-regulating Temptrace? insulated tubing bundles provide freeze protection and high temperature maintenance for gases, liquids and other process materials.
24 Parts
Light Steam Trace Bundles - LT-Temptrace?
LT Temptrace? bundles are designed with single or multiple process tubes, a thermal insulation for minimum heat loss and a flame-resistant jacket for added protection; ideal for simple instrument line freeze protection and viscosity maintenance.
10 Parts
Heavy Steam Trace Bundles - HT-Temptrace?
Parflex HT - Heavy Steam Trace Bundles are designed for use in pressure transmission applications and analyzer sample lines carrying heavy oils or distillates, gases or vapors.
10 Parts
Obsolete: CL-Constant Wattage Temptrace? for Low Temperature Maintenance
This product is no longer available from Parker. Contact us to find an alternative solution for your application.
36 Parts
Obsolete: CH - Constant Wattage Temptrace? for High Temperature Maintenance
This product is no longer available from Parker. Contact us to find an alternative solution for your application.
36 Parts
IS – Intermittent Steam Purge Bundles for Freeze Protection
Parflex IS - Intermittent Steam Purge Bundles are designed for freeze protection and periodic high-temperature steam purge.
48 Parts
Multitube CS – Continuous Steam Purge Bundles
CS-Continuous Steam Purge Bundles for continuous, high-temperature steam purge up to 1100°F (593°C). Bundles are thermally insulated for freeze protection in operating environments with harsh conditions.
48 Parts
Obsolete: Multitube Mineral Insulated Electric Trace Tubing for High Temperature Maintenance
This product is no longer available from Parker. Contact us to find an alternative solution for your application.
14 Parts
Obsolete: Analyzer Bundles for Environmental Monitoring Systems
This product is no longer available from Parker. Contact us to find an alternative solution for your application.
1 Part
Multitube Metal and Plastic Tubing Bundles
Multitube Metal and Plastic Tubing Bundles save space, reduce installation costs and offer protection in various industrial plant, robotics and laboratory applications.
92 Parts
Electric Power Connection Kit with Junction Box for SL and SH Temptrace? Bundles
Electrical Power Connection Kits are FM approved and intended for use with SL and SH-Temptrace? bundles. The kits can be used to make an easily installed combination power connection and waterproof seal for single and double tube bundles.
3 Parts
Universal Kit for SL and SH Series Self-Regulating Temptrace? Bundles
Electric splice or tee connection kit for SL and SH Series Self-Regulating Temptrace? Bundles.
4 Parts
Electrical End Termination Kit for Temptrace? Bundles
Electrical End Termination Kits deliver a simple and convenient method for terminating the non-powered end of the heating cable in Self-Regulating Temptrace? Bundles.
5 Parts
Obsolete: Electrical Connection Kits for Constant Wattage Temptrace? Bundles
This product is no longer available from Parker. Contact us to find an alternative solution for your application.
1 Part
Heat Shrink Boots (HSB) for Parflex Temptrace? Bundles
Parflex Heat Shrink Boots (HSB) are designed to prevent moisture from entering the ends of Parflex Temptrace? bundles.
6 Parts
Multitube Room Temperature Vulcanizing (RTV) End Sealant for Bundles
Room Temperature Vulcanizing (RTV) End Sealant is intended for use with all Multitube bundles, especially insulated bundles. It has excellent resistance to weather, ozone, oil, many chemicals and extreme temperatures.
3 Parts
Parker Temptrace? Feed Through (PTFT) Kits
Parker Temptrace? Feed Through (PTFT) Kits are for Temptube? and Temptrace? bundle installation and sealing.
6 Parts
Parker Multitube Splice Kits for Temptrace? Bundles
Parker Multitube Splice Kits are designed to provide long-life, weatherproof thermal insulation for Temptrace? bundles.
3 Parts
Field-Adjustable Thermostats and Temperature Controllers
Field-adjustable, and tamper-proof, thermostats and temperature controllers for use with Multitube electrically traced bundles.
4 Parts
|
