适用于CNG加油站的Burial Ready Seal-Line?保护的不锈钢管
Burial Ready Seal-Line? Protected Stainless Steel Tubing for CNG Fueling Stations

通过使用Seal-Line?埋葬的CNG不锈钢管，Parker最大限度地降低了对CNG燃料管线造成长期机械损坏的可能性以及对环境进行化学侵蚀的可能性。安装速度比裸露的裸管快30％。With Seal-Line? burial ready CNG stainless steel tubing, Parker minimizes the possibility of long-term mechanical damage to CNG fuel lines and the possibility of environmental chemical attack. Installs up to 30% faster than bare coiled tubing.

派克的Seal-Line?管已交付给您的下一个项目现场埋葬。密封线管被设计用作分配站的天然气线。它由耐用的热塑性覆盖层组成，覆盖在316 / 316L级无缝不锈钢管的整个长度上，以消除将未受保护的管道拉到位并穿过粗糙表面而造成的损坏。交付后，将产品直接从供应卷轴上拉出，并放置在沟槽中以进行埋葬。在需要将管子连接到接头的端部，可以将护套材料切回，以实现标准的接头连接。它还消除了焊接的需要，减少了潜在的泄漏点的数量，并防止了表面刮擦损坏不锈钢管。Parker's Seal-Line? Tubing is delivered to your next project site burial ready. Seal-Line Tubing is designed to be used as a natural gas line for dispensing stations. It consists of a durable, thermoplastic cover extruded over the entire length of grade 316/316L seamless stainless steel tube to eliminate the damage that occurs from pulling unprotected tubing into place and across rough surfaces. Once delivered, the product is pulled directly from the supply reel and laid into the trench for burial applications. At the ends, where the tube needs to be connected to a fitting, the jacket material can be skived back to allow for a standard fitting connection. It also eliminates the need for welding, reducing the number of potential leak points and prevents surface scratch damage to the stainless steel tube. To achieve the most robust and leak-free connections, use with Parker's Seal-Lok? fittings.

市场：
- 石油和天然气-天然气加气站

特点/优点：
- 直接埋葬准备就绪
- 安装速度比裸盘管快25％至30％
- 经过100％出厂压力测试
- 无缝管，无机械接头
- 无需长而连续的长度焊接连接和潜在的泄漏点
- 热塑性护套可防止污垢，化学物质（氯化物）侵蚀，表面刮擦，应力腐蚀，点蚀和缝隙腐蚀，以实现最长的使用寿命

应用：
- CNG加气机

技术规格：
- -40°C的工作温度范围F至212°F（-40°C至100°C）
- 316 / 316L不锈钢管结构通过ASTM A269 / A213 EAW认证，无缝
- 符合美国腐蚀工程师协会（NACE）MR0175
- 包装长度为186至730英尺（56至222米）

Markets:
- Oil & Gas - CNG Refueling Stations

Features/Benefits:
- Direct burial ready
- Installs 25% to 30% faster than bare coiled tubing
- 100% factory pressure tested
- Seamless tubing, with no mechanical joints
- Long, continuous lengths eliminate welded connections and potential leak points
- Thermoplastic jacket protects against dirt, chemical (chlorides) attack, surface scratches, stress corrosion, pitting corrosion and crevice corrosion for maximum life expectancy

Applications:
- CNG Dispensers

Technical Specifications:
- Operating temperature range of -40°F to 212°F (-40°C to 100°C)
- 316/316L stainless steel tube construction certified to ASTM A269 / A213 EAW, Seamless
- Meets National Association of Corrosion Engineers (NACE) MR0175
- Packaged lengths from 186 to 730 feet (56 to 222 meters)

技术指标
最大管外径（英寸）： 3/4
最大管子外径： 3/4英寸，19毫米
附加选项： 用户通过自己的分析和测试，将完全负责系统和组件的最终选择，并确保满足应用程序的所有性能，耐用性，维护，安全和警告要求。
管壁厚度： 0.104英寸，2.6毫米
标称外径： 0.885英寸，22.5毫米
最小弯曲半径： 6英寸，152毫米
最大工作压力： 5,500 psi，379巴
最低工作温度： -40°F，-40°C
最高工作温度： 212°F，100°C
应用： 天然气加气站
兼容配件： 海豹 CPI; A-LOK?
封面颜色： 黄色
每个包装的长度： 324 +/- 10％英尺
符合规格： ASTM A269；A213 EAW；NACE MR0175; EN10204.3.1