泄压阀，RVP 系列安全阀 - 75,000 PSI | #10RVP9072 Relief Valve, RVP Series - 75,000 PSI | #10RVP9072
Parker Autoclave RVP Series relief valves

派克 Autoclave 的 RVP 系列安全阀泄压阀为设定压力为 3,000 psi (206 bar) 至 75,000 psi (5171 bar) 的气体提供可靠的排气。该阀门的金属阀座设计可按照商业标准关闭液体和气体。派克 Autoclave 的 RVP 系列泄压阀采用金属阀座设计，可在 3,000 psi (206 bar) 至 75,000 psi (5171 bar) 的设定压力下可靠地排放气体。工作温度范围为 -423°F (-252°C) 至 400°F (204°C)。这些精密溢流阀设计用于流量不重要的高压下的热膨胀或小体积溢流应用。因此，这些型号的液体曲线未显示在目录中Parker Autoclave 可以根据特殊订单提供各种入口和出口连接。RVP 型号还提供高温选项，适用于 750°F (399°C) 的温度。指定高温选项：为 750°F (399°C) 高温选项添加后缀“HT”。

警告：
1. AE 安全阀已预设并在工厂密封。如果客户破坏密封，则保修无效。
2. 最大系统工作压力不应超过安全阀设定压力的 90%。

Parker Autoclave Relief Valve, RVP Series - 75,000 PSI

市场：

- 石油和天然气
- 石化
- 化工
- 研究

特点/优势：

- 标准型号的安全阀由 316 不锈钢制成，精选部件由抗磨损不锈钢材料制成，以实现最佳经济性和坚固性。
- 设计有 3/8” 和 5/16” Parker Autoclave 高压入口连接。所有型号的出口连接都是 3/4 英寸 NPT 内螺纹。虽然可以使用其他尺寸和连接类型的适配器，但它们的尺寸必须满足特定的流量要求。
- 孔口直径范围从 .062 (1.57mm) 到 .312” (7.92mm)。
- 设计为随着系统压力增加而打开。正确的弹簧选择可确保打开、全升程和流量以及复位压力的可重复性。
- 材料工程和严格的质量控制程序相结合，以确保最高的质量、可靠性和使用寿命。每个阀门都经过预设和工厂密封，以确保阀门正常运行。
- 独特的阀座结构加上喷嘴导向和正确选择的材料允许标准设定压力达到 75,000 psi。(5171 bar)
- 旨在提供气密性的气体关闭。
- RVS 阀门设计用于使用较少的基本组件，有助于最大限度地减少备件库存并易于维护
- 可提供 CE 标志。可应要求提供 SOG 选项。

应用：

- 压力气体系统
- 低温系统
- 蒸汽处理系统
- 中压流体处理系统

Parker Autoclave's RVP Series relief valves provide reliable venting of gases for set pressures from 3,000 psi (206 bar) to 75,000 psi (5171 bar). The valve's metal seat design provides shut-off of liquids and gases to commercial standards.

Parker Autoclave's RVP Series relief valves are designed with a metal seat design for reliable venting of gases at set pressures from 3,000 psi (206 bar) to 75,000 psi (5171 bar). The operating temperature range is -423°F (-252°C) to 400°F (204°C).These precision relief valves are designed for thermal expansion or low volume relief applications at high pressures where flow is not critical. Thus, liquid curves for these models are not shown in the catalog

Parker Autoclave can supply various inlet and outlet connections on special order. A high temperature option is also available for temperatures to 750°F (399°C) for RVP models. To specify high temperature option: Add suffix “HT” for 750°F (399°C) high temperature option.

Caution:
1. AE relief valves are preset and factory sealed. Warranty is voided if seal is broken by customer.
2. Maximum system operating pressure should not exceed 90% of relief valve set pressure.

Markets:
- Oil and Gas
- Petrochemical
- Chemical
- Research

Features/Benefits:
- Standard models of Relief Valves are constructed of 316 stainless steel with selected components made of anti-galling stainless steel material for optimum economy and ruggedness.
- Designed with 3/8” and 5/16” Parker Autoclave high pressure inlet connections. The outlet connection on all models is a female 3/4” NPT. While adapters to other sizes and connection types are available, they must be sized for specific flow requirements.
- Orifice diameters range from .062 (1.57mm) to .312” (7.92mm).
- Designed to open as a function of increasing system pressure. Proper spring selection assures repeatability of opening, full lift and flow, and reseat pressures.
- Materials engineering and stringent quality control procedures combine to assure the highest quality, reliability and service life. Each valve is preset and factory sealed to ensure proper valve operation.
- Unique seat construction plus over-the-nozzle guiding and proper selection of materials permits standard set pressures to 75,000 psi. (5171 bar)
- Designed to provide bubble tight shut off of gases.
- Engineered to perform with fewer basic components, RVS valves facilitate minimum stocking of spare parts and ease of maintenance
- Available with CE Mark. SOG option available upon request.


Applications:
- Pressure Gas Systems
- Cryogenic systems
- Steam Handling Systems
- Medium Pressure Fluid Handling Systems

Technical Specifications

Relief Valve, RVP Series - 75,000 PSI 型号