Parker 快速接头和附件 Parker Quick Couplings and Accessories Parker Quick Couplings
SNAP-TITE DESIGN, MULTI-PURPOSE QUICK COUPLINGS (HYD, FLUIDS) UP TO 11,000 PSI - H SERIES COUPLERS

Snap-tite H系列接头和液压系列流体接头可连接高达11,000 psi的Snap-tite H系列接头（液压，流体）。这些原始的Snap-tite H系列快速断开器确实具有多种用途。尺寸最大为4英寸，此快速接头可以两侧带阀，单次截止或全流量。凸形和凹形端口端部以及多种材料选择以及最广泛的可用尺寸范围，使Snap-tite H系列成为适用于各种应用的理想快速连接。双关或单关-快速接头兼容以带或不带阀的任意组合连接。全流量选件-用作直通，无阀连接（快速接头均为平头或无阀）时，额定压力范围最大为11,000 psi。在压力下连接选项-PH系列接头允许在PH系列接头侧有残余压力时与H系列带阀接头连接。建议仅将PH系列的连接的一半（耦合器或奶嘴）连接在一起。Snap-tite design, general purpose quick couplings for applications where fluid lines up to 4" require fast and easy connection and disconnection. Many sizes, ports and material options. Snap-tite H Series Couplers (hydraulic, fluids) up to 11,000 psi connect with Snap-tite H and PH Series Nipples. These original Snap-tite H Series quick disconnects are truely multi-purpose. With sizes up to 4”, this coupling can be valved on both sides, single shut-off, or full flow. Both male and female port ends as well as many material options and the widest range of sizes available, make the Snap-tite H Series an ideal quick connection for a variety of applications. Double or single shut off - Couplers and nipples are compatible to connect with or without valves, in any combination. Full flow option - Rated for pressure ranges up to 11,000 psi max when used as a straight through, unvalved connection where both coupler and nipple are plain or without valves. Connect under pressure option - PH Series couplers allow connection with H Series valved nipples when there is residual pressure on the PH Coupler side. It is recommended that only one half of the connection (coupler or nipple) be a PH Series, not both.

SNAP-TITE DESIGN, MULTI-PURPOSE QUICK COUPLINGS (HYD, FLUIDS) UP TO 11,000 PSI -
H SERIES COUPLERS

技术特性：
- 尺寸：1/4“ – 4”
- 材料：钢，铝，黄铜，316不锈钢
- 端口端：NPT公头，NPNP母头，SAE母头，SAE公头37度火炬
- 密封件选择：丁腈，碳氟化合物，乙烯丙烯

市场：
- 工业
- 建筑
- 石油和天然气
- 农业

特点/优势：
- 原始的Snap-tite H系列多用途接头，广泛用于各种应用中
- 尺寸范围最广，最大可达4英寸
- 联接器和奶嘴兼容连接，带或不带阀，可以任意组合
- PH系列压力连接，允许连接具有热膨胀引起的残余压力的管道
- 外螺纹端部选件增加了多功能性
- 可选的套筒锁有助于防止意外断开连接

应用：
- 工业液压管路
- 食品和化学加工
- 水和冷却液管路
- 高压流体输送
- 移动设备
- 清洁设备

Technical Characteristics:
- Sizes: 1/4” – 4”
- Materials: Steel, Aluminum, Brass, 316 Stainless Steel
- Port Ends: Male NPT, Female NPTF, Female SAE, Male SAE 37 degree Flare
- Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene

Markets:
- Industrial
- Construction
- Oil and Gas
- Agriculture

Features/Benefits:
- Original Snap-tite H Series multi-purpose coupling, widely used in varied applications
- Widest range of sizes up to 4"
- Couplers and nipples are compatible to connect with or without valves, in any combination
- PH Series connect under pressure version allows connection of lines with residual pressure caused by thermal expansion
- Male port end options add versatility
- Optional sleeve lock helps to prevent accidental disconnection

Applications:
- Industrial hydraulic lines
- Food and chemical processing
- Water and coolant lines
- High pressure fluid transfer
- Mobile equipment
- Cleaning equipment

Technical Specifications

技术指标

• 螺纹样式： 男
• 连接螺纹尺寸（英寸）： 1-11 1/2
• 主体材质： 316不锈钢
• 阀门样式： 提升阀
• 最大工作压力（psi）： 2000
• 机体尺寸（英寸）： 1个
• 连接类型： 不扩散条约
• 最大工作压力： 2000磅/平方英寸
• 密封材料： 丁腈
• 媒体： 液压式

• 半联轴器： 耦合器
• 最低工作温度： -40°华氏度
• 最高工作温度： 250°华氏度
• 阀门类型： 提升阀
• 袖型： 手动套
• 锁类型： 锁球
• 电镀类型： 呐
• 应用： 液压，通用

SNAP-TITE DESIGN, MULTI-PURPOSE QUICK COUPLINGS (HYD, FLUIDS) UP TO 11,000 PSI -
H SERIES COUPLERS 型号