Parker派克FEM 和 FEC系列接头 HTMA（ISO 16028）无泄漏，齐平快速接头，在压力下连接（液压，最高4568 psi）
Parker 快速接头和附件 Parker Quick Couplings and Accessories Parker Quick Couplings
HTMA (ISO 16028) Non-Spill, Flush Face Quick Couplings, Connect Under Pressure (hyd, up to 4568 psi) - FEM/FEC Series Nipples

高达4568 psi的FEM和FEC系列公头（液压），达到或超过液压工具制造商协会（HTMA-ISO 16028）标准的设计和性能要求，并与FEM系列连接器连接。FEC公头设计用于在压力下连接，以防止流体管线中包含因热膨胀而产生的残余压力。派克的FEM系列为双截止，无泄漏快速接头，旨在最大程度地减少连接或断开时的溢出和空气混入，并可与其他符合HTMA-ISO 16028的产品互换。FEM接头和奶嘴也提供各种尺寸。作为公接头和母接头的末端，可广泛用于压力高达4568 psi的应用中。FEM and FEC Series Nipples (hydraulic) up to 4568 psi, meet or exceed design and performance requirements of Hydraulic Tool Manufacturer's Association (HTMA - ISO 16028) standards, and connect with FEM Series Couplers. FEC nipples are designed to connect under pressure, in situations where fluid lines contain residual pressure caused by thermal expansion. Parker's FEM Series are double shut off, non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting and are interchangeable with other products complying with HTMA - ISO 16028. FEM Couplers and nipples are available in a range of sizes as well as male and female fitting ends to be versatile for use in applications with pressures up to 4568 psi.

HTMA (ISO 16028) Non-Spill, Flush Face Quick Couplings, Connect Under Pressure (hyd, up to 4568 psi) -
FEM/FEC Series Nipples

Parker's non-spill quick couplers and nipples are ideal for use across a variety of hydraulic applications where fluid lines require fast and easy connection and disconnection with minimal spillage and limited air inclusion. FEM and FEC Series Nipples (hydraulic) up to 4568 psi, meet or exceed design and performance requirements of Hydraulic Tool Manufacturer's Association (HTMA - ISO 16028) standards, and connect with FEM Series Couplers. FEC nipples are designed to connect under pressure, in situations where fluid lines contain residual pressure caused by thermal expansion. Parker's FEM Series are double shut off, non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting and are interchangeable with other products complying with HTMA - ISO 16028. FEM Couplers and nipples are available in a range of sizes as well as male and female fitting ends to be versatile for use in applications with pressures up to 4568 psi.

技术特征：
- FEM尺寸：1/4“ – 1”
- FEC（压力连接）尺寸：1/2“，5/8”，3/4“
- 材料：钢
- 端口端：NPSF母头，ORB母头，舱壁扩口扩口，舱壁端面密封
- 密封选项：腈/聚氨酯，EPR，碳氟化合物

市场：
- 工业
- 建筑
- 公用事业
- 农业

特点/优点：
- 所有尺寸均可与其他符合HTMA（ISO 16028）标准的联轴器互换
- 无泄漏冲洗面阀可最大程度减少断开时的流体损失减少环境污染，避免因泄漏造成的安全隐患。
- 冲洗面阀在连接流体管线时尽量减少可以进入系统的空气量，从而防止系统组件的加速磨损。
- 用于面板或板安装选件的
凸型隔板安装端- FEC接头可在由于热膨胀引起的残余压力下进行连接。

应用：
- 橇式装载机附件
- 液压工具
- 建筑设备附件
- 工业液压管路
- 农业机具
- 冷却液加注和排放管路-请联系QCD以获得黄铜的FEM型排放口接头，建议由技术和维护委员会使用美国卡车运输协会TMC建议做法353

Technical Characteristics:
- FEM Sizes: 1/4” – 1”
- FEC (Connect Under Pressure) Sizes: 1/2", 5/8", 3/4"
- Materials: Steel
- Port Ends: Female NPSF, Female ORB, Male Bulkhead Flare, Male Bulkhead Face Seal
- Seal Options: Nitrile/Polyurethane, EPR, Fluorocarbon

Markets:
- Industrial
- Construction
- Utility
- Agriculture

Features/Benefits:
- All sizes are globally interchangeable with other couplings complying with HTMA (ISO 16028) standards
- Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
- Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
- Male bulkhead fitting ends for panel or plate mounting options
- FEC nipples provide the ability to connect under residual pressure caused by thermal expansion.

Applications:
- Skid loader attachments
- Hydraulic tools
- Constuction equipment attachments
- Industrial hydraulic lines
- Agricultural implements
- Coolant fill and drain lines - Contact QCD for a brass, FEM style drain port nipple that is recommended for use by the Technology and Maintenance Council of the American Trucking Association, TMC Recommended Practice 353

Technical Specifications

HTMA (ISO 16028) Non-Spill, Flush Face Quick Couplings, Connect Under Pressure (hyd, up to 4568 psi) -
FEM/FEC Series Nipples 型号