Parker Legris乐可利快插接头 Legris push-in fittings
派克汉尼汾Parker Hannifin产品 接头和快换接头 接头 快插式接头
快插式接头

使用快插式接头能直观、快速、有效地连接管路，以创建流体分配管网。Legris乐可利快插式接头可快速设计安裝回路,来用于如: 压缩空气, 天然气或液态的流体.该接头具有良好的耐压, 耐温和流体的适应性能. 连接和脱离可用手动瞬间实现

LF3000 系列快插式接头	LF3600 系列铜镀镍快插式接头
LF 3800/LF 3900 系列303/316L不锈钢快插接头，用于腐蚀环境	LF6100黄铜快插接头，用于润滑系统及真空系统
LF3200微型气动推入式接头（3mm）

LF3000 系列快插式接头

LF 3000 系列快插式接头
LF 3000 系列快插式接头系列有多种形状和尺寸，您可以找到符合您需求的优质产品，从而优化设备的使用。

工程塑料或者铜镀镍气动调速节流阀
工程塑料或者铜镀镍气动调速节流阀
派克乐可利调速节流阀产品有工程塑料、铜镀镍或铝等形式的产品。带外部调节和安全调节螺丝两种调节方式，提供了精密调节和紧凑性，适用于所有应用。

LIQUIfit 接头
LIQUIfit 接头
派克的 LIQUIfit 接头确保可靠，紧凑的连接，用于液体输送的应用。LIQUIfit为水应用提供“环保设计”的创新替代方案; 没有流体污染，保证环境保护。

LF3600 系列铜镀镍快插式接头

LF 3600 系列铜镀镍快插式接头
为了满足您的技术和环境要求，派克乐可利设计了该系列的金属快插式接头，在大多数苛刻环境下能够为工业流体提供稳定、可靠和耐用的连接方案。

铜镀镍快插接头，Prestolok PLP 系列
铜镀镍快插接头，Prestolok PLP 系列
派克的Prestolok PLP 接头提高了产量，提高了效率，减少了占地面积，加快了装配和无泄漏的创新。

符合D.O.T.刹车管路要求
符合D.O.T.刹车管路要求
适用于所有D.O.T. 卡车和拖车应用，派克Prestomatic 接头与传统的压缩接头比，装配时间缩短了90％。

全铜快插接头，符合 D.O.T. 刹车管路要求
全铜快插接头，符合 D.O.T. 刹车管路要求
Parker的 PTC 接头是一种符合D.O.T. 以及 SAE 标准的快插接头，与传统的压缩接头比，减少了安装时间。

LF 3800/LF 3900 系列303/316L不锈钢快插接头，用于腐蚀环境

LF 3800/LF 3900 系列303/316L不锈钢快插接头，用于腐蚀环境
为了满足您的技术和环境要求，派克乐可利设计了该系列的金属快插式接头，在大多数苛刻环境下能够为工业流体提供稳定、可靠和耐用的连接方案。

塑料埋入式接头： LF 3000和LIQUIt Carstick，快速接头
塑料埋入式接头： LF 3000和LIQUIt Carstick，快速接头
派克乐可利开发了Carstick埋入式接头系列产品，维护非螺纹连接腔体组装前后密封系统完整性。一体式Carstick埋入式接头紧凑型设计能实现制造过程自动化，提高系统稳定性。

派克TrueSeal 系列，符合FDA认证全塑料快插接头
派克TrueSeal 系列，符合FDA认证全塑料快插接头
派克TrueSeal 接头由符合FDA标准的材料制造，是符合与食品接触的NSF-51接头.灰色的乙缩醛接头符合NSF-61对饮用水的要求。

气动消音器
气动消音器
消音器安装到排气回路，用于降低设备运行时的噪音值，从而提高用户舒适度。

气动闭锁接头
气动闭锁接头
闭锁接头用于成对地安装在气缸上，当先导信号中断时，同时切断进气和排气从而锁定气缸。

PMT系列，Prestometic 黄铜快插接头
PMT系列，Prestometic 黄铜快插接头
派克的Prestometic黄铜接头是为所有D.O.T.（美国交通局）卡车和拖车应用设计的。适用车辆和设备的各种应用，具有行业先进的性能和价值。

LF3000 系列铰接式接头
LF 3000 系列铰接式接头
当只能从上方安装并且需要配合管路方向时，该系列接头之选。该系列模块化接头包括单一配置和复式配置，可满足更加灵活的设计。

复合材料快插接头
复合材料快插接头
复合材料快插连接接头提供了一种将管件与接头连接的简单方法。Prestolok复合材料接头不需要使用衬套和拧紧螺母，从而减少装配时间。

Prestolok PLM金属快插接头
Prestolok PLM金属快插接头
派克 Prestolok PLM接头具有高磷，符合FDA标准，无电镀镍，耐水，耐苛性洗涤剂和其他腐蚀性流体。

LF3000系列快插接头附件 派克乐可利设计了不同的附件来保护设备以及操作，
LF3000系列快插接头附件 派克乐可利设计了不同的附件来保护设备以及操作，
派克乐可利设计了不同的配件来保护操作者和设备，并且可以避免管路的意外断开。不同的颜色标识系统可以用来分辨不同的流体回路。

LF 3000 自密封接头和旋转接头
LF 3000 自密封接头和旋转接头
派克乐可利开发了两种创新的推入式接头，以便集成各种功能，并允许在气动回路上快速安装。

LF 3000 模块化气动快插接头
LF 3000 模块化气动快插接头
这些连接接头可在紧凑的空间内连接尽量多的管道。派克乐可利提供符合人体工程学的解决方案，以实现复杂的快速安装连接。

LIQUIt 快插式接头，带金属油口
LIQUIt 快插式接头，带金属油口
LIQUIfit 系列产品用于液体输送应用，补充扩展了金属过渡接头的选择范围。这些接头确保可靠和紧凑的连接，提供了优异的坚固性能。

ACCE_Region_Product_List???
快插式接头( 21 - 37 / 37 ) 切换至列表视图 List切换至网格视图 Grid PREV

气动传感接头
气动传感接头
派克气动传感接头可以在气缸行进至末端，缸内背压即将消失时做动，输出气/电压或电子信号，以作为其他控制之用。

Prestolok PLS 不锈钢快插接头
Prestolok PLS 不锈钢快插接头
派克PLS接头符合FDA标准，允许与食品和其他侵蚀性环境的永久接触。

不锈钢气动调速节流阀
不锈钢气动调速节流阀
不锈钢调速节流阀是在需要高机械强度或者高化学腐蚀性的应用环境中，可以用来调节气缸活塞杆的速度以及气体的流速。

快插式埋入接头，用于交通行业
快插式埋入接头，用于交通行业
派克的SAE埋入式接头允许用户消除安装和组装常规管螺纹配件所需的空间和劳动力。

气动调压接头
气动调压接头
无论进气端压力如何波动，派克乐可利调压接头都可以使输出给气动设备的压力值保持恒定。

工业用埋入式快插接头
工业用埋入式快插接头
派克的工业埋入式接头允许用户消除安装和组装常规管螺纹接头所需的空间和劳力。

气动缓启动接头
气动缓启动接头
这种接头可以防止突然冲击，保护您的系统。在系统开启后，控制出气端回路的压力逐渐增加至所需压力，从而有助于减少工业事故的发生。

气动减压接头
气动减压接头
派克乐可利减压接头用于将气动回路的压力设定为固定值。因此，它们能够通过限制气缸压力实现节能。

PMH低压液压接头
PMH低压液压接头
PMH快插连接接头设计用于加快装配，在难以到达的区域，如液压操纵杆端口。

金属埋入式接头
金属埋入式接头
为了兼容多种流体和适应恶劣使用状况(+150?C)，派克乐可利开发了两类埋入式接头。使用我们的金属埋入式接头可以优化安装配置，对于FTL而言，接头还可以拆卸。

LIQUIfit 聚合材料单向阀
LIQUIfit 聚合材料单向阀
LIQUIfit 单向阀能满足饮料输送的要求。
这些接头可以让流体单方向流动，反向截止。
这些接头可以进行管式安装，能够对系统进行整体保护。

LIQUIfit+ 快插接头，用于敏感流体
LIQUIfit+ 快插接头，用于敏感流体
用于传输敏感性流体，LIQUIfit+系列产品可抑制回路中的细菌生长，在清洁后可 达到无菌的清洁度，LIQUIfit +接头有助于降低维护成本。该系列接头无需开槽即可直接与304以及316L不锈钢管连接。

气动塑料快换接头
气动塑料快换接头
快换接头无需排空整个系统即可隔离回路。它们便于反复连接和断开，确保绝对安全

CleanFit 快插接头，用于生命科学和洁净室
CleanFit 快插接头，用于生命科学和洁净室
这个“环保设计”的“CleanFit系列接头用于生命科学和洁净室，在清洁度，可靠性和安全性方面超越了当前连接的限制。 这种超清洁范围确保与大多数气体完全兼容，符合苛刻的应用和标准。

旋转弯头
旋转弯头
派克快插式旋转弯头设计有更好的稳定性和耐用性，免于由于管道过度弯曲而导致的管道磨损。

LF 3600 Low Lead Brass Push-In Fittings
LF 3600 Low Lead Brass Push-In Fittings
This range of low lead brass fittings offers a reliable solution designed for all kind of coffee machine of hot beverages dispenser. Its robust design and proven technology offer
optimum performance for a universal use.

TrueSeal Acetal & Kynar Check Valves - Push to Connect
TrueSeal Acetal & Kynar Check Valves - Push To Connect
Parker's Push-to-Connect check valves are manufactured from either acetal or kynar material and allow liquid to flow in one direction.

LF 3000系列 塑料接头适用于压缩空气
乐可利LF3000系列塑料接头可广泛应用于气动领域,体积小, 具有真空能力,工作压力为20 bar, 工作温度从-20°C 到 +80°C, 可连接多种材质的塑料管类产品

LF 3200: 3 MM PUSH-IN FITTINGS
The LF 3200 range is the answer to very small pneumatic installations with severe size and weight constraints, together with an absolute requirement for precision and reliability. LIQUIFIT and LIQUIFIT+: TWO PUSH-IN FITTINGS SYSTEMS FOR WATER AND BEVERAGES These 2 "eco-designed" ranges propose an innovative alternative for water and beverage applications. No fluid contamination occurs and environmental protection is guaranteed. These fittings ensure reliable and compact connections for liquid transfer applications. LIQUIFIT+ is more particularly dedicated to the transfer of sensitive fluids. This range reduces the growth of bacteria in the circuits for 100% cleanliness after cleaning and can be directly connected to stainless steel tubing, without grooving, for diameters 5/16" and 3/8".

LIQUIfit WITH METAL ADAPTOR
This LIQUIfit? range extension, composed of fittings with metal adaptors, in stainless steel or FDA nickel-plated brass, was designed for liquid transfer applications. These fittings ensure reliable and compact connections as well as excellent
robustness, particularly when combined with metallic ports.

LF3600系列 铜镀镍接头适用于流体及气体

乐可利LF3600铜镀镍接头用于低腐蚀性环境或食品制造行业．铜镀镍的材质和FKM的密封圈都符合FDA标准。适用真空应用，工作压力30bar，工作温度从-20°CF到150°C间，可与所有塑料管类产品连接使用

LF 3900/LF3800系列, 采用不锈钢材质, 适用于严苛的流体和环境

LF 3900和LF 3800产品系列,所有结构采用不锈钢材质,可用于传输腐蚀性的流体和工作环境, 并可应用于多个行业: 食品, 化工,医疗等…本体和基座采用AISI 316L不锈钢材质, FKM密封圈, 释放还采用不锈钢316L (LF 3900) 或 303 (LF 3800).工作压力为20 bar, 工作温度从 -20°C 至 +120°C, 可于所有塑料材质管子连接使用

LF6100系列铜快速接头

适用于润滑系统乐可利LF6100系列铜质快速接头采用双层密封结构，可确保管子不脱落．工作压力为60bar，工作温度从-40°C到120°C。该系列接头可用于传输润滑油，冷却系统或需要增强系统安全的场合

Legris埋入式接头

This range is designed to implement sealing capability directly into other components; it can optimize dimensions, installation time and compatibility with different environments. Parker Legris proposes polymer or metal cartridges, suitable for different usage constraints or housing. The polymer range offers Carstick cartridges and Quick Fittings (a combination of a Carstick and instant fitting) for compressed air and LIQUIfit Carsticks for all fluids and gases. The metal range comes in different materials: brass and stainless steel. Suitable for vacuum and for pressures up to 20 bar, for use between -20° C and +95° C (depending on model).
- 本系列产品为自动气压装置提供良好的解决方案
- 节约安装时间，完全安全
- 为配合塑料管件而设计（尼龙和 PU）

MISCELLANEOUS ACCESSORIES FOR INSTANT FITTINGS

Legris push-in fittings
LF 3000, POLYMER HR, FOR COMPRESSED AIR The LF 3000 range of durable plastic fittings is ideal for pneumatic installations, modern design and compact. Vacuum capability (28" Hg), working pressure up to 20 bar, working temperature from -20°C to +80°C, for use with all types of calibrated plastic tubing.
LF 3200: 3 MM PUSH-IN FITTINGS
LIQUIFIT and LIQUIFIT+: TWO PUSH-IN FITTINGS SYSTEMS FOR WATER AND BEVERAGES
LIQUIfit WITH METAL ADAPTOR
LF3600, NICKEL-PLATED BRASS, FOR LIQUIDS AND GASES
LF3800-LF3900 STAINLESS STEEL FOR AGGRESSIVE FLUID
MISCELLANEOUS ACCESSORIES FOR INSTANT FITTINGS

Stainless Steel Push-To-Connect Fittings

Parker Legris' comprehensive range of stainless steel Push-to-Connect fittings for the transfer of low-pressure industrial fluids, including the patented LF 3800? pneumatic fittings, is an efficient way to connect tubing to a fitting to create a fluid distribution network. With its quick installation, versatility and unsurpassed durability, the stainless steel push-in fittings contribute to improve the durability of machines against corrosion. All our stainless steel Push-to-Connect fittings are available in a wide range of configurations and are manufactured in AISI 316L to withstand the most diverse fluids, including aggressive chemicals, and extreme temperatures or pressures, which are used in many of today's major industrial markets.

LF 3800/ LF 3900 - 303/316L Stainless Steel Push-In Fittings for Aggressive Environments
In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most demanding environments.

Prestolok PLS Push-to-Connect Stainless Steel Fittings
Parker's PLS push-to-connect pneumatic fittings conforms to FDA standards permitting permanent contact with food and other aggressive environments.

Plastic Push-To-Connect Fittings

Parker legris’ comprehensive portfolio of plastic push-to-connect fittings for industrial low pressure fluids transfert, including patented LF 3000? pneumatic fittings, for low pressure fluids transfert is the most intuitive and efficiency way of connecting tubes to a fitting in order to create a fluid distribution network. Thanks to its quick installation, versatility and exceptional lifespan, the plastic push-in fitting contributes to improving machine efficiency and cost reduction. All of our plastic push to connect fittings are available with a wide selection of configurations and plastic materials suitable for a wide of fluids among other things compressed air, gas, water, food liquids and beverages or chemicals, that serve across many of today's major industrial markets.

PFA Gripper (Compression) Tube Fittings (sizes up to 3/4 inch) – Pargrip Series
Pargrip PFA Tube Fittings provide a leak tight connection, making them ideal for use in highly corrosive chemical tubing systems. The fittings feature a double ferrule design and are available in a variety of sizes (1/8 to 3/4 inch) and configurations.

UHP PFA Fusible Pipe Fittings (sizes up to 2 inch) – Parbond Series
Parbond Series PFA Fusible Pipe Fittings offer high leak integrity and are designed to yield a permanent connection in high-flow, minimal pressure drop applications. They are ideal for ultra-high purity (UHP) and corrosive chemical piping systems.

UHP PFA Tube Fittings (sizes up to 1 inch) – Parflare Series
Parflare PFA Tube Fittings provide a leak tight connection with minimal dead volume and are ideally suited for use in ultra-high purity (UHP) semiconductor manufacturing and/or corrosive chemical applications. Available in sizes from 1/4 to 1 inch.

UHP PFA Threaded Pipe Fittings (sizes from 1/8 inch - 1 inch)
PFA Threaded Pipe Fittings are ideally suited for ultra-high purity or corrosive chemical handling piping applications. The fittings offer high leak integrity and extreme resistance to corrosion. They are available in sizes ranging from 1/8 to 1 inch.

UHP PFA/PTFE Thermocouple Sensor Assembly – TS Series
The TS Series PFA/PTFE Thermocouple Sensor Assembly is suited for point-of-use temperature monitoring in ultra-high purity fluid handling systems. It offers superior corrosion resistance and is designed to accept any 1/8 inch thermocouple probe.

UHP PFA Tube Fusion Bond Fittings (sizes up to 1 inch) – Tubebond Series
Tubebond Series PFA Tube Bond Fittings (sizes 1/4 to 1 inch) offer high leak integrity and are ideal for ultra-high purity (UHP) tubing systems that do not require removable components or have lower pressure requirements that may not require PFA pipe.

18 Parts

Pneumatic Banjo Fittings - LF 3000?
This range of fittings is ideal when access is only possible from above and orientation of the tube is required. This range of modular fittings includes single and multiple configurations, allowing wide flexibility of design.

88 Parts

Modular & Multi-port Pneumatic Push-in Connectors - LF 3000?
These modular & multi-port connectors allow the maximum number of tube connections in a minimum of space. Parker Legris offers an ergonomic solution to enable quick connection for the most complex installations.

26 Parts

Pneumatic Self-Sealing and Oscillating Fittings - LF 3000?
Parker Legris has developed two innovative push-in fittings in order to integrate various functions and allow quick installation on pneumatic circuits.

34 Parts

Accessories for Push-In Fittings - LF 3000?
Parker Legris has designed different accessories to protect operators and equipment, and prevent accidental disconnection of tubing. Colour-coding also allows for fluid circuit identification.

79 Parts

Air Brake D.O.T. composite push-to-connect fittings, PTC
Parker's PTC fitting is a composite push-to-connect air brake fitting that meets D.O.T. and SAE specifications and reduces assembly time versus compression style fittings.

186 Parts

Push-to-Connect all plastic FDA compliant fitting, Parker TrueSeal
Parker's TrueSeal push-in tube fittings are manufactured from FDA compliant materials and are NSF-51 listed for contact with food. Gray acetal fittings meet NSF-61 requirements for potable water.

379 Parts

LIQUIfit+ Push-In Fittings for Sensitive Fluids
For the transfer of sensitive fluids, the LIQUIfit+ range reduces the growth of bacteria in your circuits for 100% cleanliness after cleaning, and can be directly connected to stainless steel tubing, without grooving.

15 Parts

Direct Buried Connectors
The new Parker Legris connectors were developed to optimise installation and provide long-term integrity for underground FTTx networks.

24 Parts

Direct Install Connectors
A range of high performance connectors dedicated to direct install systems for FTTx to guarantee easy use and long service time.

21 Parts

LIQUIfit? Push-In Fittings with Metal Adaptors
The LIQUIfit? range now benefits from a range extension of metal adaptors designed for liquid transfer applications.
These fittings ensure reliable and compact connections combined with excellent robustness.

223 Parts

Passive Gas Block Connector
Easy-to-use product, providing quick and efficient sealing of the end of the FTTx* network and thereby long-term protection of the installation.

5 Parts

Composite Push-to-Connect Fittings
Parker Prestolok composite push-to-connect fittings provide a simple way of connecting tubes to a fitting. Prestolok composite push in fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut.

LIQUIfit Fittings
Parker's LIQUIfit fitings ensure reliable and compact connections for liquid transfer applications. LIQUIfit offers an "eco-designed" innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed.

Industrial Push-to-Connect Cartridges
Parker's industrial cartridges allows the user to eliminate the space and labor required to install and assemble a conventional pipe thread fitting.

14 Parts

Pneumatic Push-In Fittings - LF 3000?
The LF 3000? pneumatic fitting range, with its wide variety of shapes and configurations, allows you to find the perfect connector to meet your needs and thus optimise the use of your equipment.

697 Parts

CleanFit Push-In Fittings for Life Sciences and Clean Rooms
This "eco-designed" CleanFit range drives high-tech equipment beyond current connection limits in terms of cleanliness, reliability and safety. It ensures perfect compatibility with most gases, and complies with demanding applications and standards.

237 Parts

Oscillating Elbows
Parker's push-to-connect oscillating elbows are designed for optimum reliability and durability preventing tube wear due to excessive flexing of the tubing.

25 Parts

Autoline SAE J2044 Push-to-Connect Fittings
Parker's Autoline push-to-connect design reduces hose assembly fabrication time and the exclusive locking mechanism minimizes leaks and installation failures.